3/11/2024 0 Comments Ping loopback meme![]() ![]() For bounce servers this will be a range of the IPs or subnets that the relay server is capable of routing traffic for. On simple clients, this is usually a single address (the VPN address of the simple client itself). Note that CRS has a maximum of 8 queues per port.This defines the IP ranges for which a peer will route traffic. On all CRS switches the scheme where MAC based egress traffic scheduling is done according to internal Priority would be following: -> -> -> In this example, host1 (E7:16:34:00:00:01) and host2 (E7:16:34:00:00:02) will have higher priority 1 and the rest of the hosts will have lower priority 0 for transmitted traffic on port ether7. If congestion occurs in the port where high-priority traffics keeps coming, the lower priority queues starve. If no congestion is present at the egress port, a packet is transmitted as soon as it is received. Traffic is transmitted from the highest priority queue until the queue is empty, and then moves to the next highest priority queue, and so on. The queue number represents the priority and the queue with the highest queue number has the highest priority. In Strict Priority scheduling mode, the highest priority queue is served first. PCP/DEI based traffic scheduling and shaping: -> -> -> ĭSCP based traffic scheduling and shaping: -> -> -> MAC-based traffic scheduling using internal Priority ![]() Protocol based traffic scheduling and shaping: -> -> -> -> VLAN based traffic scheduling and shaping: -> -> -> -> MAC based traffic scheduling and shaping: -> -> -> -> interface ethernet switch port-isolationĪdd port-profile=2 protocol-type=dhcpv4 type=dst forwarding-type=bridged ports=ether1 registration-status="" traffic-type="" Quality of Service (QoS) Assume that all ports used in this example are in one switch group. This example requires a group of switched ports.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |